Rear Driveway Drainage Correction & Concrete Replacement in College Park, MD
Share this project:
Scope of Work
Project Overview
The homeowner was experiencing recurring water pooling along the rear driveway near the garage and deck. Over time, a section of the existing concrete had settled along a control joint, creating a low area where stormwater collected instead of draining away from the structure.
To correct the problem, we removed the affected section of concrete, rebuilt the base, and installed a new reinforced concrete slab with proper grading. The project also included rebuilding the adjacent access step to match the updated elevations and improve the overall drainage path.
Before / AFTER
Site Conditions
The Property and Site Conditions
The drainage issue was located at the rear driveway next to an elevated wood deck and garage. While the original concrete remained structurally intact, one section had gradually settled along the center seam. As a result, water flowing down the driveway became trapped in the low area instead of continuing toward the intended drainage route.
The standing water was most noticeable near the deck, where moisture regularly collected after rainfall. Because the surrounding concrete sections drained differently, the settled slab interrupted the natural flow of water across the driveway surface.
In addition to the drainage concerns, the existing concrete access step needed to be adjusted to accommodate the new elevations required for the corrected slope.
In Progress
ASSESsMENT
What We Did
The project began with demolition of the affected driveway section measuring approximately 8 feet by 21.5 feet. After removal, the area was excavated and prepared for reconstruction.
Once the base was exposed, we regraded the sub-base to establish the proper pitch needed to move water away from the low spot. Before the concrete pour, reinforcement was installed using steel rebar and wire mesh to help strengthen the new slab and reduce future movement.
With the grading complete, new concrete was placed and finished with a broom texture for durability and traction. Control joints were installed to help manage natural concrete movement and cracking over time.
Along the deck edge, a stone-filled drainage area was incorporated to help manage runoff and improve drainage where water had previously collected. The nearby access step was also rebuilt to match the new driveway elevation and provide a clean transition between the house and the surrounding concrete surfaces.
After completion, the driveway surface provided a more consistent slope, eliminating the low area that had been contributing to standing water and improving drainage throughout the rear portion of the property.
Completed Project
Thinking About a Similar Project?
Drainage problems often start with subtle settlement, improper grading, or low spots that become more noticeable over time. Whether you’re dealing with standing water, failing concrete, or drainage issues around your home, our team can help identify the cause and recommend a long-term solution.
Free Project Planning
"*" indicates required fields